![\"electric](\"https:\/\/corn-machine.com\/wp-content\/uploads\/2026\/10\/electric-chaff-cutter.png\" "\\"\\"")
How Does the TZ-420 Forage Cutting Machine Work?<\/h2>\n\n\n\n
The machine follows a straightforward process: configuration selection, material feeding, cutting or crushing, and discharge.<\/p>\n\n\n\n
1. Select the Right Configuration Before Operation<\/strong><\/p>\n\n\n\n Before starting the chaff cutter, choose the appropriate configuration according to the material and desired output. The TZ-420 offers 3 mm and 8 mm sieve options for different corn-crushing requirements, as well as a separate configuration for cutting straw without a crushing sieve. Stop the hay cutting machine and disconnect its power source before changing the sieve or internal configuration.<\/p>\n\n\n\n 2. Feed the Material into the Straw and Feed Crusher <\/strong><\/p>\n\n\n\n Once the straw cutter and grain grinder are properly configured and started, feed the material through the corresponding inlet. Grass and straw are processed through the forage-cutting function, while dry corn is fed for grain crushing. The dual-inlet design allows the machine to handle these different processing tasks.<\/p>\n\n\n\n 3. Cut or Crush the Material<\/strong><\/p>\n\n\n\n As the material enters the processing chamber, the grass powder machine cuts grass and straw into shorter pieces or crushes dry corn into smaller particles. The resulting size depends on the selected processing configuration and the material being processed.<\/p>\n\n\n\n 4. Discharge and Collect the Finished Material<\/strong><\/p>\n\n\n\n After processing, the chopped forage or crushed corn is discharged for collection. Farmers can then use it directly in their feed preparation process or mix it with other ingredients according to their livestock feeding requirements.<\/p>\n\n\n\nImprove Farm Feed Preparation with the TZ-420<\/h2>\n\n\n\n